F1 2026 Engine Explained: The 50/50 Power Unit and Why It Changes in 2027

F1 2026 engine explained: how the 50/50 power unit works, why superclipping happened, and how 2027 moves to a 420kW engine and 300kW electric.

F1 hybrid power unit with its battery on display, with the overlay "The 50/50 power unit" for BISER3A's F1 2026 engine explainer
Mercedes hybrid power unit and battery (2014–2025 era). Photo: David Merrett / Wikimedia Commons, CC BY 2.0

The F1 2026 engine is a 1.6-litre turbocharged V6 hybrid designed to split its power roughly 50/50 between combustion and electricity: about 400kW from the engine and up to 350kW from the electric motor, with the MGU-H removed and every car running on 100% advanced sustainable fuel. In practice the split worked out closer to 53/47, the battery became the limiting factor, and the sport has already agreed to shift the balance back towards the combustion engine in 2027 and 2028. Here is how the power unit works, what went wrong, and exactly what changes next.

This is the second part of the BISER3A evergreen explainer series. If you want the wider picture first, including the smaller cars and active aero, start with our complete guide to the F1 2026 rules. This piece goes deeper on the engine side: the hardware, the energy numbers, the fixes made during the season and the two-step change that follows.

Key facts: the F1 2026 engine

  • Engine: 1.6-litre turbocharged V6, retained from the 2014–2025 era
  • Combustion power: about 400kW
  • Electric motor (MGU-K): up to 350kW, up from 120kW
  • MGU-H: removed
  • Energy recovery: roughly 8.5–9MJ per lap, about four times the old 2MJ limit
  • Battery: 4MJ of usable energy swing per lap
  • Compression ratio: 16:1, down from 18:1
  • Fuel: 100% advanced sustainable, with an energy-based flow limit
  • Real-world split: about 53/47 combustion to electric
  • 2027: 420kW engine, 300kW electric deployment, about 58/42
  • 2028: 450kW engine, target 60/40

What Is an F1 Power Unit in 2026?

Formula 1 stopped calling it an “engine” in 2014, because the thing behind the driver is a complete hybrid system rather than a single motor. Under the 2026 rules that system has fewer parts than before, but the electrical side does far more work. The main elements are:

  • Internal combustion engine (ICE): the 1.6-litre V6 with a single turbocharger. It now produces around 400kW (about 540PS).
  • MGU-K (Motor Generator Unit – Kinetic): an electric motor-generator connected to the crankshaft. It harvests energy under braking and deploys up to 350kW to the rear wheels.
  • Energy Store (ES): the battery, which can swing through 4MJ of usable energy.
  • Control electronics (CE): the brain that manages how and when energy moves between the battery, the MGU-K and the wheels.
  • Turbocharger: still there, but no longer paired with an electric motor-generator.

What does MGU-H mean, and why was it removed?

The MGU-H (Motor Generator Unit – Heat) sat on the turbocharger shaft, recovering energy from exhaust gases and spinning the turbo to kill lag. It was brilliant engineering, but expensive, fiendishly complex and almost irrelevant to road cars. Dropping it was a key condition for attracting new manufacturers. Audi chose 2026 as its entry point, and Ford returned as Red Bull’s technical partner (see our report on the Ford–Red Bull deal).

F1 2026 Engine Specs: Old vs New

The headline is that total peak output stayed in the same ballpark, above 700kW, while the recipe changed completely. Here is the side-by-side comparison.

Element2014–2025 power unit2026 power unit
Engine layout1.6L turbo V61.6L turbo V6
Combustion engine outputwell over 500kWabout 400kW
MGU-K power120kW350kW
MGU-HYesRemoved
Energy recovered per lap2MJ (MGU-K limit)about 8.5–9MJ
Fuel flow limit100kg/h (mass-based)energy-based, roughly 70–75kg/h
Compression ratio18:116:1
Power split (ICE / electric)about 80/20designed 50/50, about 53/47 in practice
FuelE10 (10% sustainable)100% advanced sustainable fuel
F1 power units compared. Sources: Mercedes-AMG F1, Honda, Formula1.com, F1 Chronicle, F1Technical.

Why is fuel flow now measured in energy, not kilograms?

With fully sustainable fuels, different suppliers can produce fuels with different energy densities. Limiting the flow by mass would reward whoever brewed the most energy-dense fuel, so the 2026 rules cap the amount of energy entering the engine per hour instead. In practical terms that works out at roughly 70–75kg of fuel per hour, down from the old 100kg/h, which is the main reason the combustion engine lost around a quarter of its power.

How the 50/50 Power Split Works

On paper, the maths is simple: roughly 400kW from the V6 plus up to 350kW from the MGU-K gives a near 50/50 split at full deployment. The catch is that the electric half only exists while there is energy in the battery, and the battery is small compared with how hard the motor can pull on it.

Why is the battery the bottleneck?

The Energy Store can swing through 4MJ per lap. At the full 350kW, the MGU-K would empty those 4MJ in a little over 11 seconds. A typical F1 lap takes around 80–90 seconds and includes several long full-throttle sections, so no car can deploy full electric power everywhere. Teams therefore harvest constantly, under braking, at part throttle and even at full throttle, to recharge the battery up to the per-lap recovery limit of roughly 8.5–9MJ, and spend it where it buys the most lap time.

That is why the real-world balance over a lap settled at about 53/47 in favour of the combustion engine, as analysis by F1Technical, The Race and Motor Sport found. It is still a huge jump from the 80/20 of the previous era, and it explains why race outcomes in 2026 were shaped so heavily by energy management.

Recharge, Boost and Overtake Mode: Energy on the Steering Wheel

Three tools sit on the steering wheel, and understanding them makes the 2026 races much easier to follow:

  • Recharge: the official term for harvesting. Most of it is automatic, managed by the control electronics under braking and at part throttle. Lift-off regeneration is the one recharge mode the driver triggers directly.
  • Boost: a button that deploys maximum available power, or a team-set profile, to attack or defend at any point on the lap.
  • Overtake Mode: the replacement for DRS. If a driver is within one second of the car ahead at the detection point, they gain an extra 0.5MJ of energy from the start of the next lap, plus a more generous deployment profile.

Overtake Mode is why following closely matters more than ever: the one-second window unlocks energy, not a wing flap. The active aero that replaced DRS is a separate system, covered in detail in our F1 2026 rules guide.

Superclipping Explained: Why F1 Cars Slowed Down on Straights

“Clipping” describes the moment when the battery runs out of deployable energy and the car loses its electric push, usually near the end of a straight. In 2026 teams went further with what became known as superclipping: at full throttle, the MGU-K switches from driving the wheels to acting as a generator, taking power away from the combustion engine to recharge the battery.

The effect, visible on onboard footage and timing data, was a car that appeared to stop accelerating, or even lost speed, before the braking zone. For drivers it felt counter-intuitive; for fans it looked strange. In qualifying, where drivers traditionally go flat-out for a single lap, superclipping meant laps were managed rather than attacked.

What Went Wrong in 2026, and the Miami Fixes

Three problems pushed the FIA, F1, teams and manufacturers to act within weeks of the season starting:

  1. Closing speeds: when one car is deploying and another is harvesting, the speed difference on a straight can be enormous. Oliver Bearman’s heavy crash at the Japanese Grand Prix in Suzuka, after closing rapidly on Franco Colapinto, made this a safety issue overnight.
  2. Qualifying no longer flat-out: energy limits meant drivers lifted, coasted or superclipped on their fastest laps.
  3. “Yo-yo” racing: cars passed each other in one part of the lap and were re-passed in another as energy states swung, producing plenty of overtakes but criticism that they felt artificial.

On 20 April 2026 all stakeholders agreed a package of refinements, applied from the Miami Grand Prix in early May:

AreaBefore MiamiFrom Miami
Qualifying maximum recharge8MJ per lap7MJ per lap (superclip cut to about 2–4 seconds)
Peak superclip harvesting power250kW350kW (qualifying and races)
Race Boostuncapped profilecapped at +150kW above current power
Race MGU-K deployment350kW anywhere350kW from corner exit to braking point; 250kW elsewhere
Race startsno detectionlow-power start detection with automatic MGU-K deployment and warning lights
2026 mid-season power unit refinements. Sources: Formula1.com, Crash.net.

The fixes reduced the strangest moments, but they were patches on top of a fundamental imbalance. That is why the bigger change for 2027 followed.

The Compression Ratio Row

The 2026 rules cut the maximum compression ratio from 18:1 to 16:1, measured with the engine cold. Before the season, Ferrari, Audi and Honda suspected that Mercedes had found a way to exploit thermal expansion so that its engine ran a higher ratio once hot. Mercedes denied gaining any meaningful advantage, and Toto Wolff later dismissed the saga as “a storm in a teacup”.

The FIA’s response was to close the loophole rather than rule on legality: from 1 June 2026 the compression ratio is checked in both hot and cold conditions, and from 2027 it will be measured only at operating temperature. It is a good example of how a single number in the engine rules can become a political fight.

The Five 2026 Engine Manufacturers and Their Teams

The new rules attracted the biggest engine line-up F1 has had in years. Five manufacturers supplied the 11-team grid in 2026:

  1. Mercedes — teams: Mercedes, McLaren, Williams, Alpine (4). Powered the 2026 champions: Kimi Antonelli took the drivers’ title and Mercedes the constructors’ crown.
  2. Ferrari — teams: Ferrari, Haas, Cadillac (3). Supplied newcomer Cadillac in its debut season.
  3. Red Bull Ford Powertrains — teams: Red Bull Racing, Racing Bulls (2). Red Bull’s first in-house engine, built with Ford as technical partner.
  4. Honda — team: Aston Martin (1). An exclusive works partnership after Honda’s long spell with Red Bull.
  5. Audi — team: Audi (1). The only brand-new manufacturer, after taking over Sauber (read about the Audi R26 concept).

To stop one manufacturer running away with the formula, the rules include ADUO (Additional Development and Upgrade Opportunities): manufacturers whose power unit falls a set margin below the average are given extra development allowances during the season.

Infographic: the F1 2026 engine in numbers, 400kW combustion, 350kW MGU-K, 4MJ battery and the 2027 shift to 420kW and 300kW
The F1 2026 engine in numbers. Graphic: BISER3A

Why the 50/50 Split Changes in 2027

By May 2026 the sport had agreed in principle to move towards a 60/40 split in favour of combustion. The details were announced on 10 June, and the World Motor Sport Council ratified the plan in Macau on 23 June. In its statement the FIA said the aim was to make qualifying “more flat-out” without hurting the racing the new rules had produced.

Rather than redesign the engines, the change uses three levers: more fuel flow so the V6 makes more power, less electric deployment so the battery lasts longer, and faster harvesting so it refills more quickly. Overtake Mode keeps its full 350kW, so the chasing car still gets a meaningful electrical advantage.

2027 vs 2028: The Numbers

Element202620272028
Fuel flowbaseline+5%+13%
Max combustion engine power400kW420kW450kW
Max MGU-K deployment350kW300kW300kW
Overtake Mode deployment350kW350kW—
Max harvesting power350kW375kW400kW
Approximate split (ICE / electric)53/47 in practice58/4260/40
Standard race distance305km290km305km
Phased F1 power unit changes. Sources: RACER, F1Technical, Formula1.com, Motor Sport, The Race, RacingNews365.

Why are F1 races shorter in 2027?

More fuel flow means more fuel burned per lap. Keeping the 305km race distance would have forced some teams to design bigger fuel tanks, an expensive change under the cost cap for a single season. So the F1 Commission approved cutting the standard distance to 290km for 2027, two or three laps fewer at most circuits, with Monaco staying at 260km. From 2028, when chassis designs can accommodate more fuel, the distance returns to 305km.

Who benefits from the 2027 engine rules?

Shifting power back to the combustion engine rewards manufacturers with the strongest V6, and reduces the advantage of the best energy management software. Manufacturers that were behind in 2026 can use their ADUO allowances to close the gap. The 1.6-litre V6, the sustainable fuel and the absence of the MGU-H all stay, because the core power unit architecture is fixed for this regulation cycle, which runs to the end of 2030.

Watch this space as the season finale approaches: the title is settled (see our São Paulo GP report), but the last two rounds in Qatar and Abu Dhabi are the final races of the pure 50/50 era.

F1 2026 Engine FAQ

How much horsepower does a 2026 F1 engine have?

The combustion engine produces about 400kW (around 540PS) and the MGU-K up to 350kW (around 470PS), so peak combined output is above 700kW, roughly 1,000PS, when the battery is fully deploying.

What is the 50/50 split in F1?

It is the 2026 design target of roughly half the peak power coming from the combustion engine and half from the electric motor. Over a real lap the balance settled at about 53/47 in favour of combustion, because the battery cannot sustain full electric power all the time.

Why did F1 remove the MGU-H?

The MGU-H was expensive, extremely complex and had little relevance to road cars. Removing it simplified the power unit and was key to bringing in new manufacturers such as Audi and Ford.

What is superclipping in F1?

Superclipping is when the MGU-K switches to generator mode at full throttle, taking power from the combustion engine to recharge the battery. The car stops accelerating, or slows, before the braking zone.

What changes to F1 engines in 2027?

Fuel flow rises by 5%, combustion power goes from 400kW to 420kW, maximum electric deployment drops from 350kW to 300kW and harvesting rises to 375kW, moving the split to about 58/42. Overtake Mode keeps 350kW.

Why are F1 races shorter in 2027?

Higher fuel flow means more fuel is used, so the standard race distance is cut from 305km to 290km for 2027 to avoid costly bigger fuel tanks. It returns to 305km in 2028.

Which manufacturers make F1 engines in 2026?

Mercedes, Ferrari, Honda, Audi and Red Bull Ford Powertrains. Mercedes supplies four teams, Ferrari three, Red Bull Ford two, and Honda and Audi one each.

Featured photo: Mercedes hybrid power unit and battery on display — David Merrett / Wikimedia Commons, CC BY 2.0. The unit shown is from the 2014–2025 era, when the MGU-H was still fitted.

More from BISER3A: F1 2026 rules: the complete guide · Cadillac’s F1 entry approved · Formula E Gen4 heads for Jeddah

Join the conversation

Your email address will not be published. Required fields are marked *

Please keep it respectful. See our comment rules.