The most common tyre mistakes drivers make are checking tyre pressure when the tyres are hot, inflating to the number printed on the sidewall, ignoring the tyre’s age code, mixing different tyres on the same axle and waiting until the tread hits the legal limit before replacing it. Every one of them is cheap to avoid. Tyres are the only part of a car that touches the road, and in the Gulf’s summer heat, on long desert highways and fully loaded family trips, a neglected tyre is far more likely to fail than in a mild climate.
This guide lists the 10 tyre mistakes we see most often, what each one does to grip, wear and safety, and the simple fix. It also explains how to read the tyre date code on the sidewall, what tyre pressure your car really needs and what the rules say in the UAE and the wider GCC. If a warning light has already come on, start with our guide to car warning lights and what they mean.
In this guide
Key facts: tyres
- Check pressure: at least once a month (GCC guidance says weekly) and before long trips, always with the tyres cold
- Cold means: the car has not been driven for about three hours
- Correct pressure: on the label in the driver’s door jamb or in the owner’s manual, not on the tyre
- Temperature effect: pressure changes by roughly 1 psi for every 10°F (about 5.5°C)
- Tyre age: carmakers and tyre makers recommend replacement between 6 and 10 years from production, whatever the tread
- Date code: the last four digits of the DOT code, week then year (2324 = week 23 of 2024)
- Legal tread minimum: 1.6 mm in the UK and EU, 2/32 inch (1.6 mm) in US guidance; many experts advise replacing at 3 mm
- UAE penalty for unsafe or expired tyres: AED 500 fine, 4 black points and 7 days’ impoundment
Tyre Mistakes at a Glance
Here is the full list with the risk each mistake creates and the fix. The detailed explanations follow below.
| # | Mistake | What it causes | The fix |
|---|---|---|---|
| 1 | Checking pressure when tyres are hot | Under-inflated tyres once they cool | Check cold, before driving |
| 2 | Inflating to the sidewall number | Over-inflation, less grip, longer braking | Use the door-jamb label |
| 3 | Relying on the TPMS light alone | Driving for weeks under-inflated | Gauge check every month |
| 4 | Ignoring the tyre’s age | Cracking, tread separation, blowouts | Read the DOT date code |
| 5 | Buying old stock as new | Starting life already aged | Check the date before fitting |
| 6 | Mixing tyres on one axle | Pulling, unstable braking, ESP confusion | Same model and size per axle |
| 7 | Fitting the new pair at the front | Rear grip loss and spins in the wet | New tyres go on the rear |
| 8 | Waiting for the legal tread limit | Long wet braking, aquaplaning | Replace around 3 mm |
| 9 | Wrong load, speed or heat rating | Overheating and failure when loaded | Match the manufacturer’s spec |
| 10 | Never rotating, forgetting the spare | Uneven wear, a useless spare | Rotate about every 10,000 km |
10 Tyre Mistakes Drivers Make
1. Checking Tyre Pressure When the Tyres Are Hot
Risk: high · Cost to fix: zero · Rule of thumb: check after the car has stood for about three hours
Driving heats the air inside a tyre and raises its pressure. If you top up at a petrol station after a 40-minute highway run and set the tyres to the recommended figure, they will sit below that figure once they cool. Both the US road-safety regulator NHTSA and Bridgestone define cold as a car that has not been driven for at least three hours. The Gulf Standardization Organization (GSO) gives the same advice: check pressure when the tyres are cold.
If you have to check after a drive, do not let air out to reach the recommended number. Note the reading, then check again in the morning. A tyre that reads high when hot is normal; a tyre that reads low when hot is seriously under-inflated.
2. Inflating to the Number on the Tyre Sidewall
Risk: medium · Cost to fix: zero · Where to look: driver’s door jamb, fuel flap or owner’s manual
The pressure moulded into the sidewall is the tyre’s maximum pressure, not the pressure your car needs. Bridgestone warns that running at the maximum increases wear and can reduce traction and braking ability. The right figure is set by the carmaker for your model, load and sometimes speed, and is printed on a label on the driver’s door jamb (the B-pillar), inside the fuel flap or in the owner’s manual.
Many cars list two pressures: one for normal driving and a higher one for a full load or sustained high speed. If you are heading off on a family road trip with a full boot, use the loaded figure.
3. Relying on the Tyre Pressure Warning Light
Risk: high · Cost to fix: a gauge · When the light comes on: about 25% below the recommended pressure on US-standard systems
A tyre pressure monitoring system (TPMS) is a safety net, not a maintenance tool. Under the US standard FMVSS 138, the warning only has to come on when a tyre is 25% or more below the recommended cold pressure. On a tyre that should run at 35 psi, that means the light may stay off until it drops to about 26 psi, which is already enough to cause extra heat, shoulder wear and longer braking. NHTSA is clear that TPMS does not replace a manual check every month.
Under-inflation is the most dangerous pressure mistake because heat is what kills tyres. A soft tyre flexes more, runs hotter and is more likely to fail at highway speed, especially in summer. If the light does come on, treat it as an amber warning: slow down, check all four tyres and the spare at the next safe stop.
4. Ignoring the Tyre’s Age
Risk: high · Cost to fix: zero to check · Typical replacement window: 6 to 10 years from production
A tyre can look new and still be dangerously old. Rubber hardens and cracks with time, heat and sunlight even if the car is rarely used, and the steel belts inside can start to separate. Ford, Nissan and Mercedes-Benz tell owners to replace tyres six years after the production date regardless of tread, while Continental and Michelin set a 10-year limit with annual inspections from year five. NHTSA gives the same six-to-ten-year range and notes that research shows tyres age faster in hot climates.
That last point matters in the Gulf. A car parked outside through a Riyadh, Dubai or Doha summer bakes its tyres every day. Look for fine cracks in the sidewall and between the tread blocks (as in the photo at the top of this article), bulges, or a tyre that feels hard. If you see any of them, replace the tyre whatever its tread depth.
5. Buying “New” Tyres That Are Already Old
Risk: medium · Cost to fix: asking one question · GCC rule: 24 months maximum from production to sale for car tyres
A tyre starts ageing on the day it is made, not the day it is fitted. Gulf technical regulations limit the time between production and sale to 24 months for car, light truck and bus tyres (30 months for heavy trucks), and GSO advice is to choose tyres made within the last year where possible. In the UAE, retailers cannot sell a tyre as new if it is more than two years old.
Before the fitter mounts your tyres, read the date code on each one (see how below) and refuse any that are older than you were promised. A discount on two-year-old stock is not a bargain if it shortens the life of the tyre.
6. Mixing Different Tyres on the Same Axle
Risk: high · Cost to fix: buying in pairs · Michelin’s rule: same model, size and tread on each axle
Michelin says fitting tyres of different brands, tread patterns, tread depths or seasons on the same axle is generally prohibited by law, and should only happen temporarily, for example on a spare after a puncture. Two different tyres on one axle grip, brake and corner differently, so the car can pull to one side under braking. Different rolling circumferences can also confuse the stability control (ESP) and the tyre pressure monitoring system.
Different brands front and rear are allowed, as long as each axle matches. Four-wheel-drive and all-wheel-drive cars are more sensitive: they are designed around specific rolling circumferences front and rear, and a big mismatch can strain the centre differential. On a 4×4, follow the carmaker’s tyre advice and ask a professional before replacing only two tyres.
7. Fitting the New Pair at the Front
Risk: high in the wet · Cost to fix: zero · Michelin’s advice: new tyres on the rear axle
When only two tyres are replaced, most drivers want the new ones at the front, because the front wears faster and does the steering. Michelin recommends the opposite: put the tyres with the deepest tread on the rear axle. Rear tyres with less tread are the first to aquaplane on a wet road, and losing grip at the rear causes oversteer, a spin that is much harder for an ordinary driver to catch than front-end understeer.
This applies to front-wheel-drive cars too. The goal is stability in an emergency, which depends mostly on rear grip.
8. Waiting for the Legal Tread Limit
Risk: high in rain · Legal minimum: 1.6 mm (UK/EU) · Recommended: consider replacing at 3 mm
The legal minimum tread depth in the UK is 1.6 mm across the central three-quarters of the tread, around the whole tyre, and US guidance from NHTSA is to replace tyres at 2/32 of an inch, the same 1.6 mm. In the UK, each illegal tyre can bring a fine of up to £2,500 and 3 penalty points. But legal is not the same as safe: The AA suggests considering replacement at 3 mm and aiming to change tyres before they go below 2 mm, because wet braking distances grow quickly as the grooves get shallower.
Gulf rain is rare but heavy, and the first shower after months of dry weather leaves roads covered in oil and dust. That is exactly when worn tyres aquaplane. Every tyre has small tread wear indicator bars in the grooves; when the tread is level with them, the tyre is finished.
9. Choosing the Wrong Load, Speed or Heat Rating
Risk: high when loaded · Example: load index 95 = 690 kg per tyre · GCC advice: temperature grade A or B
The sidewall code tells you how much weight and speed a tyre is built for. In a marking such as 205/55 R16 91V, the load index (91) gives the maximum load per tyre and the speed symbol (V) the maximum speed. GSO’s tyre safety guide explains that a load index of 95 equals 690 kg per tyre and that speed symbols run from L (120 km/h) to Y (300 km/h). Fitting a cheaper tyre with a lower load index on a seven-seat SUV that is often full of passengers and luggage is a classic mistake.
Tyres sold in the Gulf also carry a temperature grade of A, B or C, where A resists heat best. GSO recommends A or B tyres for the region. Always match or exceed the load index and speed rating listed by your carmaker. A higher speed rating does not, of course, allow you to exceed the speed limit.
10. Never Rotating the Tyres and Forgetting the Spare
Risk: medium · Rotation interval: about every 10,000 km · Spare: check its pressure and age too
Front and rear tyres wear at different rates. GSO advises swapping tyre positions after roughly 10,000 km to spread wear evenly, and NHTSA gives a range of 5,000 to 8,000 miles (about 8,000 to 13,000 km) where the carmaker recommends rotation. Uneven wear also tells you something: wear on both edges points to low pressure, wear in the centre to over-inflation, and wear on one edge to an alignment problem.
The spare is the most forgotten tyre on the car. It ages even if it has never touched the road, because a tyre mounted and inflated on a wheel counts as in service. Check its pressure every month with the others and read its date code. Space-saver spares are for short, slow journeys only, and NHTSA advises against using even a full-size spare as a long-term replacement for a worn tyre.

How to Read the Tyre Date Code
Every road tyre carries a DOT code on its sidewall: the letters DOT followed by a string of letters and numbers that identify the factory, size and batch. The last four digits, usually inside an oval, are the production date. The first two digits are the week of manufacture and the last two are the year.
| Code on the tyre | Production date | Age in late 2026 |
|---|---|---|
| 0119 | Week 1 of 2019 | Almost 8 years: replace |
| 3521 | Week 35 of 2021 | About 5 years: inspect closely |
| 2324 | Week 23 of 2024 | About 2.5 years |
| 1226 | Week 12 of 2026 | Under a year |
The full code is sometimes only on the inner sidewall, so you may need to turn the steering to full lock or look from under the car. Tyres made before 2000 used a three-digit code; any tyre with a three-digit date is far too old for road use.
What Tyre Pressure Should My Car Have?
Your car’s correct tyre pressure is on the tyre information label, usually on the driver’s door jamb, and in the owner’s manual. Most passenger cars sit somewhere around 30 to 36 psi (2.1 to 2.5 bar), but this varies by model, wheel size and load, so never copy a figure from another car. Gauges and pumps in the region show psi, bar or kPa: 1 bar is about 14.5 psi and 100 kPa.
Tyre pressure in hot weather
Pressure changes by roughly 1 psi for every 10°F, or about 5.5°C, of temperature change. A car that leaves home at 25°C on a winter morning and sits in a 45°C car park in summer sees a real difference, which is why pressure should be checked more often when the seasons change. In hot weather, resist the temptation to let air out of hot tyres: they are designed to run warmer, and the cold reading is the one that counts.
Under-inflated vs over-inflated
| Under-inflated | Over-inflated | |
|---|---|---|
| Wear pattern | Both outer edges (shoulders) | Centre of the tread |
| Heat | Runs much hotter, risk of failure | Normal |
| Grip and braking | Vague steering, longer braking | Smaller contact patch, less grip |
| Fuel use | Higher | Slightly lower |
| Comfort | Soft, wallowy | Harsh over bumps |
Going off-road? Lowering pressure for sand is normal practice in the desert (the sand is where events like the Qatar International Baja are won and lost), but the tyres must be re-inflated to the road figure before you return to the highway. Driving at speed on deflated tyres is one of the fastest ways to destroy them.
Tyre Rules in the UAE and GCC
Gulf countries take tyre safety seriously because tyre bursts are one of the main causes of highway crashes in the region, according to GSO. The rules below are the ones drivers ask about most.
| Rule | Where | Detail |
|---|---|---|
| Production-to-sale limit | GCC technical regulations | 24 months for car tyres, 30 months for heavy trucks |
| “New” tyre age at sale | UAE | Not more than 2 years since production |
| Expired tyre age | UAE | Tyres around 5 years old are treated as expired |
| Penalty for unsafe/expired tyres | UAE | AED 500, 4 black points, 7-day impoundment |
| Heat grade | GSO advice | Temperature grade A or B recommended |
| Storage | GSO advice | Dry, out of sun, at or below 35°C |
Abu Dhabi Police’s advice to drivers is simple: check your tyres regularly, look for cracks and bulges, and make sure they are not past their expiry date. If your car is going in for an annual test, check the date codes beforehand; tyres that fail inspection have to be replaced before the registration can be renewed.
A 5-Minute Monthly Tyre Check
- Pressure: all four tyres and the spare, cold, with a reliable gauge, against the door-jamb label.
- Tread: look at the wear indicator bars or use a tread gauge; plan replacement at about 3 mm.
- Sidewalls: cracks, cuts, bulges or exposed cords mean the tyre must be replaced.
- Date codes: note the oldest tyre on the car and plan for replacement before six years in a hot climate.
- Valves and caps: missing caps let in dirt and moisture; replace them.
- Wear pattern: uneven wear means pressure, alignment or suspension needs attention.
Looking for a new car with the right tyres for Gulf driving? Read our Jetour T2 review and our story on the new Hyundai Tucson Hybrid and IONIQ 6 N. For the racing side of tyres, our F1 2026 rules guide explains how the cars changed this year.
Tyre Mistakes FAQ
At least once a month and before every long trip, always when the tyres are cold. Gulf guidance from GSO recommends a weekly check, which is sensible in very hot weather.
Cold. Check after the car has not been driven for about three hours. Pressure rises as tyres heat up, so a hot reading will look higher than the real cold pressure.
The figure on the tyre information label in the driver’s door jamb or in your owner’s manual. The number printed on the tyre sidewall is the maximum pressure, not the recommended one.
Find the DOT code on the sidewall. The last four digits are the production week and year: 2324 means the 23rd week of 2024.
Carmakers and tyre makers recommend replacing tyres between 6 and 10 years after production, whatever the tread depth. Heat speeds up ageing, so in the Gulf aim for the lower end, and in the UAE tyres around five years old are treated as expired.
Different brands front and rear are allowed, but each axle should have two identical tyres of the same model, size and tread. On 4x4s, follow the carmaker’s guidance.
On the back. Michelin recommends fitting the two tyres with the most tread on the rear axle to reduce the risk of the rear sliding in the wet.
Driving with unsafe or expired tyres in the UAE carries an AED 500 fine, 4 black points and seven days’ vehicle impoundment.
Sources
- NHTSA — Tires: tire safety, pressure, tread and aging
- GSO — Safety of car tyres (consumer guide)
- Bridgestone — Tire inflation
- Michelin Middle East — Mixing tyres
- Edmunds — How old and dangerous are your tires?
- The AA — Tyres and the law
- Gulf News — Abu Dhabi: Dh500 fine, four black points for expired tyres
- Khaleej Times — UAE police warn of tyre blowout risks in summer
- Pitstop Arabia — UAE tyre replacement rules; dubizzle — Car tyre safety in the UAE; US FMVSS 138 (TPMS)
Featured photo: cracking between the tread blocks of an all-season tyre, a typical sign of ageing — Ken T1381 / Wikimedia Commons, CC BY-SA 3.0.












